|
Post by annabananarchy on Aug 31, 2008 12:37:13 GMT -5
I'm trying to tune my Farfisa Fast 3 however the oscillators won't budge when I'm trying to turn them. I was wondering if anyone had any advice on this.
Thanks!!
|
|
|
Post by karl on Aug 31, 2008 22:06:16 GMT -5
Hi annabananarchy, Yes, you must be very careful with these tuning coils, you don't want to break the core that is in there. You might try using a hair dryer to warm everything up and see if you can get the coils to loosen up. Now, because the heat will probably affect the tuning you have to wait till it cools down before actually tuning it.
Karl
|
|
|
Post by annabananarchy on Sept 12, 2008 10:51:35 GMT -5
Hi Karl, Thanks for your advice! I tried it though and it didn't work... looks like one of the tuning screws was severely stripped down and I had no choice but to take it in Thanks again, Anna
|
|
bradx
New Member
Posts: 41
|
Post by bradx on Sept 15, 2008 1:11:40 GMT -5
mine were glued, i heated up the glue with a soldering iron.
|
|
|
Post by ucujoxbi on Oct 30, 2019 15:35:40 GMT -5
|
|