|
|
Post by organdetox on Jan 17, 2010 11:52:20 GMT -5
How do you get to the tone generators that are down below the wood casing of the farfisa? I'm a bit afraid to take the organ apart without more knowledge. It is my F# that needs tuning, and it appears that I can not reach the tuning apparatus without disassembling the organ. Does anyone have any helpful hints, (and maybe some images)?
|
|
|
|
Post by putzengiler on Jan 18, 2010 18:02:27 GMT -5
This is probably Farfisa 101. You set up the organ like you were gonna play it. Then underneath there are 5 wingnuts. You loosen them up all the way until the wing bolts slip out. Then you can lift the whole body of the organ up and prop it up using scraps of 1x4 or what ever . So you have acess to the Tone generator/oscillator cards. Tune away! using a tuner. Hopefully thats all you have to do.
|
|
|
|
Post by putzengiler on Jan 18, 2010 18:10:51 GMT -5
I forgot . You also have to loosen the 4 screws on the power supply (The section with the Transformer and tubes) and slide it back towards the keyboard. So you are able to lift the organ body out. Since there are knobs and stuff sticking out of the back of the power supply. Hope you can follow that. Remember to take the top cover off first. Good Luck !!
|
|
