|
Post by phillyslick on Aug 26, 2009 20:20:10 GMT -5
Hi,
I purchased a 'broken' Doric Cheetah on craigslist for 45 dollars today. Previous owner claimed it didn't power on. Power has been modded, standard computer plug is wired to the source. I plugged it in, turned it on, light goes on, no sound.
There are two TRS sockets, an output and a bass. The bass has two wires soldered to it, The output socket has no wires soldered to it.
The only wires not connected to anything are a short, pink wire that is very far from the socket - it comes from a board on the underside of the top of the organ. On the right side of that same board, there is a plug-dealy that isn't connected to anything.
Sorry for the vague descriptions - ill get a camera tomorrow and upload some pics.
1) Obviously the 1/4" sockets need to be wired... I just have no idea to where. 2) Is there a chance that the light for the unit would work but the power supply is still bad?
Thanks for any help
-Ben
|
|
blair
New Member
Posts: 98
|
Post by blair on Aug 28, 2009 14:32:05 GMT -5
Ben -
I can't help you on this one. I actually saw that organ listed and almost drove down from northern NJ to get it, but then figured I had enough project organs myself.
|
|